11. AURO 751 LIME-CASEIN WALL PAINT 3KG
Wall paint in powder form. White, satin-matt finish for (almost) any wall surfaces inside: woodchip wallpaper, loam rendering, gypsum plasterboard, concrete, brickwork, lime and cement rendering, lime sand brickwork.
- Open-pored, highly breathable
- Mix with water to use
- Once mixed, can be tinted with AURO 350 Lime Tint
- Brush and roller application
- Not suitable for damp rooms
Wall paint in powder form. White, satin-matt wall paint for (almost) any wall surfaces inside: woodchip wallpaper, loam rendering, gypsum plasterboard, concrete, brickwork, lime and cement rendering, lime sand brickwork. Not suitable for damp rooms. Just mix with water, preferably with a paint stirrer attached to the drill. If you want to add some colour: The ready-mixed paint can be tinted with Auro Lime tinting base no. 350.
Mix ratio: add/stir 1 kg powder to 1 ltr water. Allow to swell for 30 minutes and stir well with a paint stirrer. Apply 2-3 coats, allowing for 24 hours of drying time between coats. Carefully cover adjacent areas.
In wet state, the coating appears transparent but dries up to a slightly cloudy, white surface. After mixing, the paint can be tinted with up to 20 % of AURO Lime tinting base No. 350.
|Available Sizes||Approx. coverage m2|
|3 kg||40 sq.m|
Coverage quoted is approx and may vary due to application or absorbtion from the substrate etc.; figures are for total area one coat would cover.
- mineral fillers, titanium dioxide, milk casein, calcium hydroxide, sodium bicarbonate, cellulose