AURO 350 LIME TINTING BASE
Liquid pigment for tinting AURO lime based paints and plasters. Where vibrant colouring is desired the Lime tints can be painted as full tones!
- For tinting lime paints and lime products
- For individual, colourful wall design
- Ready for use, easy application
Tinting base paint for colouring AURO Chalk paint no. 326, High-grade lime paint no. 344, Lime filler no. 342, Lime plaster fine no. 345, Trowel lime plaster no. 347, as well as Anti-mould paint no. 327, Airfresh wall paint no. 328 and Lime-casein paint no. 751. Where vibrant colouring is desired the Lime tints can be painted as full tones.
Lime paints should preferably be applied with a wide paint brush in crossing movements. When rolling, apply the last layer in one direction only. The reworking of already dried surfaces or the spot repair of small areas will lead to brindle surface appearance.
Prepare the substrate thoroughly and prime with the product, diluted with up to 20% water. Allow for 24 hours of drying time between coats.
For strong colour tones, the Lime tinting base can be painted directly. AURO Lime paints and plasters can be tinted with it.
|Available Sizes||Approx. coverage m2|
|250 ml||2.5* m2|
|500 ml||5* m2|
|2.5 L||25* m2|
|*||* as full-shade colour|
Coverage quoted is approx and may vary due to application or absorbtion from the substrate etc.; figures are for total area one coat would cover.
- water, calcium hydroxide, mineral pigments, mineral fillers, cellulose